AGP is in process of paving another 60,622 SY of 18″ RCC for Port Houston at Barbours Cut. As this project is being built in an operating terminal, coordination between the Port, paving contractor, and general contractor is paramount to ensure paving operations are completed in a timely and safe […]
A.G. Peltz Group, LLC (AGP) placed another 90,000 + cubic yards of 18″ thick RCC at the Port Houston Bayport Facility. The project was placed in two equal 9″ RCC lifts and production rates routinely exceed 1,200 cubic yards per day. Project supplier partners included: Vulcan Materials, Ashgrove Cement, Charah, […]
A.G. Peltz Group, LLC placed 43,000 of 8” RCC for a Dale Tile distribution facility in 2016 in Dickson, TN. The paving was completed using an ABG Titan 8820 with varied paving widths (8’-24.5’) due to various obstacles at the site. AGP also poured a concrete apron around the building […]
A.G. Peltz Group, LLC placed 43,445 square yards of 7 & 10 inch RCC at the Honda Facility in Lincoln, Al in 2017/18. Since the inaugural project back in 2000, the Honda Lincoln facility has utilized close to two million square yards of RCC, making in the largest RCC Paving […]
AGP placed 4,500 cubic yards of 17” and 37,000 cubic yards of 12” RCC for a new empties yard container facility at Bayport. This design build project was unique public/private partnership between Port Houston and Terminal Link Texas (TLT). The final product provided TLT a 25-acre empties yard inside the […]
The SCDOT was having a significant problem with asphalt rutting on high traffic US 78 near Charleston. The existing roadway was built on poor soils and SCDOT needed a durable pavement option which could be placed quickly and minimize traffic disruption. A 10” single lift RCC layer with a 2” […]
RCC (95,575 cubic yards) was selected in lieu of PCC pavement for heavy loading conditions for a new container yard. The project consisted of 144,000 square yards of 18” RCC pavement and 61,000 square yards of 14” RCC pavement. RCC production rates routinely exceeded 400 cubic yards per hour with […]
AG Peltz Group, LLC has placed over 411,000 square yards of RCC Pavement in five phases at the NIT facility in Norfolk, VA. The initial project was specified in 2005 based on comparison of four Pavement systems including PCC, Asphalt, Pavers, and RCC. The asphalt section was subsequently eliminated from […]
23,600 square yards of 16” RCC; 2,950 square yards of 12” RCC; and 9,200 square yards of 8” RCC were utilized in the conversion of an existing automobile intermodal center to a container handling facility. The new packer pad, maintenance pad, entrance and exit roadways utilized RCC as the paved […]
A.G. Peltz Group provided the RCC paving for the reconstruction of the intermodal facility at Salinas Victoria, Mexico. The container yard consisted of 100,110 square yards of 17” RCC pavement and was constructed while the facility was in operation. A.G. Peltz Group worked with the owner to develop a paving […]
AG Peltz Group, LLC mixed and placed approximately 5,583 square yards of both 9” and 16” RCC at the existing CSX Fairburn Intermodal Facility in 2010. The CSX decided to add capacity at this yard and elected to utilize RCC in lieu of asphalt for two reasons: 1) the poor […]
44,950 square yards of 15” RCC and 32,150 square yards of 9” RCC for a new wood pelletizing plant. Georgia Biomass selected RCC in lieu of asphalt based on the extremely high loading and expected reduction in maintenance cost with utilizing RCC.
The project consisted of 14” RCC for packer pads and 17″ RCC for the gantry crane wheel path as well as 6″ RCC for the trailer storage. Phase I and Phase II combined to approximately 50,000 cubic yards of 650 PSI flexural and 4,500 PSI compressive. In addition, Peltz placed […]
125000 square yards of 7″ RCC pavement for the Honda Logistics Improvements at the Lincoln, AL manufacturing facility. A.G. Peltz Group LLC was responsible for all site paving and base construction on the project. Paving system utilized 4″ of cement treated base which allowed the owner to use completed base […]
First use of RCC on an interstate roadway application in the United States. This project won the 2006 National Partnership for Highway Quality Silver Award and SCAN Innovation Award. The project consisted of over 35 lane miles of shoulder replacement with 6” and 8” RCC. Read More – Rolling Out […]
A.G. Peltz Group provided the RCC paving for the reconstruction of the intermodal facility at Toluca, Mexico. The container yard now consists of approximately 120,000 square yards of 17” RCC pavement.
